26x1.7/2.2 35 mm Schrader Valve Inner Tube



MRP : ₹ 299

Made In : Thailand,China

Made for 26" bike wheels with tyres with a 1.2 to 1.5 cross-section. 35mm Schrader valve adapts to most wheels.
26 x 1.45 to 26 x 70 Schrader valve inner tube for 26-inch tyres and wheels.
Sizes guide

Home     Delivery


view all stores

Compatibility26x1.7 to 26x2.2 tyres and 26" wheels.
WaterproofHigh quality valve that retains pressure.
Warranty2 Years
Technical Information

How to choose your inner tube
Check all the information indicated on the sidewall of the tyre (diameter and width). For example, 27.5 x 1.90 means a tyre with a 27.5-inch diameter that is 1.90 inches wide. On the tyre sidewall you will also find the dimensions in mm in ETRTO international units. For example, 50-584 means your tyre is 50mm wide with an inner diameter of 584 mm (approx. 26x1.90).
Removing an inner tube
Remove the used inner tube using B'Twin tyre levers (item code 8047839).
Checks to carry out before installing an inner tube
Check the condition of your tyre and replace it if necessary. Make sure no objects are lodged in the tyre. Check the condition of your tyre rim strip. A rim strip that is even slightly bent can cause punctures. Check that your rim does not have any other issues that could damage your inner tube
Mounting the inner tube
Pre-inflate the inner tube slightly to avoid pinching. Insert the valve, making sure you are using the correct valve for your rim. Put the inner tube entirely inside the tyre so that it fits inside the rim. Take care not to pinch the inner tube when fitting.
Mounting the tyre
Start by mounting the tyre onto the wheel on the opposite side to the valve. Finish mounting the tyre at the valve to avoid pinching the inner tube. Never mount your tyre with a screwdriver or a tyre lever, as you risk pinching and puncturing the inner tube.
Inflating the tyre
Inflate your tyre carefully, to the pressure recommended by the manufacturer (visible on the tyre sidewall in PSI or bars, 1 bar = 14.51 PSI). Regularly check that your tyre is in the correct position as you inflate it.
Tip from the pros
To avoid punctures from pinching and for best tyre performance, we recommend that you check your tyres and inflate them to the suggested pressure before every ride.
Information / Concept / Technology
Structure : 100.0% Rubber - Synthetic

Our inner tubes are tested continually by our professional teams, such as the U-19 Pro Racing Team and the MTB Racing Team.

Product test
To guarantee optimal quality, 100% of our inner tubes are inflated for a period of 8 hours.

Stockage tips
Carry your inner tubes in a container that protects them from perforations (tool case, original packaging, etc.).

Maintenance tips
Wheel size is printed on the sidewall of your tyre. Always have a spare inner tube and a pump.


Sort by:
Good no issue
Used for 2 to 8 weeks
Perfect fit
It's good
Used for 3 to 6 months
Reasonable and good quality
Good product
Used for 2 to 8 weeks
Used it for more than two weeks. No troubles so far. It feels great to ride with it.
bigger size!
Used for 2 to 8 weeks
Though the numbers on tire matches with the tube, this tube is bigger for Btwin MyBike Size L and the tube that comes with bike with bike is 'RALSON' make and its thicker than the 'Btwin' make tube.
Response of the brand
Hello Praneeth, 

Thank you for taking the time to give us your review. The inner tube is compatible with 26" bikes which mean it can go on all the wheels which are of the size 26". If the inner tube is little larger, it should be ok because the extra space will be filled up with air. in case you are feeling a bump at regular intervals after fully inflating the tyres, you have to stop using the bike and get a replacement inner tube. It is possible that the one purchased was defective. 

not upto the mark
Used for More than 1 year
for small loads only , the tube get punctured. not good strength
So far good. But not yet sure.
Used for 2 to 8 weeks
Product is good. Not best. Because it's very less time to judge
So i gave one less star
26" inner tube
Used for 3 to 6 months
so far its running good
So far good!
Used for 3 to 6 months
I picked up this inner while I had to go down south from Bangalore and I have been using this from the past three months.Value for money.
I'd also recommend the self healing inner tube which is a much better option and a perfect upgrade.
Schrader Valve Inner Tube
Used for 7 to 12 months
nice product
Show results for