₹ 599 Décathlon
Few months back I bought cycle pump BTwin 500. Initially I used to carry my pump in my hydration pack(BTwin 2L) and had no issues.But few days back I decided to mount it on my cycle with the help of provided rack which comes with pump. After 2 ride I noticed that pump does not lock properly and its handle becomes loose which I am showing in the attached pic.I am not sure why this will happen,it may be due to road vibration,as I understand this could be quality issue with the product itself.
Also please note based on my purchase couple of cycling buddies also bought same model and I don't want to disappoint them in future with the product.
I will really appreciate your attention to this email and corrective action for same.
Thank you for taking the time to give us your review. There are 2 problems mentioned in the review and there is a solution for both. The pump holder has to be facing upwards when you install on the frame. This will prevent the pump from falling down during vibrations. Second, the nozzle of the pump should be facing towards the pedals and not the handlebar. This will prevent the pump leaver from sliding downwards while riding. I remain available for more questions.
This product proved to be absolutely useless. DO NOT RECOMMEND.
Thank you for taking the time to give us your review. Please give us more information as to why the product was not helpful and we will be happy to guide you through the usage or provide effective solutions.
My bike has Schrader valves. It fits well with the rear wheel valve but not with the front wheel valve. Air leaks with the front valve. To avoid air leak I have to precisely align the pump against the valve and support with my fingers. A very little jerk while pumping leads to air leak. But all these problems are with front valve alone. Weird!!
Works very well for the rear wheel. With very less effort, I am able to get the pressure in tube.
I have purchased a few months back. now it is not working. I couldn't used it even once as it is so tight and unable to pump to the required tyre pressure
Thank you for taking the time to give us your review.
The hand pump is a life-saving product when you have a flat on your ride and need to fix it. You can fill enough pressure for you to take it to the nearest petrol bunk where you can inflate up to full PSI levels. However, if the pump is being used to as a replacement for a floor pump where you are trying to fill to maximum PSI every time you take your bike for a ride, it will be tiresome. The pump's piston will get harder to pump as you reach higher PSI levels. Though it is possible to fill the recommended pressure it will be difficult provided you are using the best techniques.
In your case, if you say the pump is not working, please let us know which part. You can always carry your pump to the nearest decathlon store and ask for a fix. If we find that the product is defective we will replace it for you.
Deepak BABU E-sport leader BTWIN
Reasonable rate of real product
I bought Schrader 26.1.7/2.2 inner tube, 3 tyre levers, flexible hose pipe and this pump. The very next day when I went for my regular cycling tyre go punctured luckily I was carrying all these with me that morning. The tyre levers worked really fine, I was able to take out my punctured tube very easily and the pump and the flexible hose pipe worked really well and gave my perfect tyre pressure. It took me around 15-20 mins to change my tyre tube. Thanks for this awesome products.
P.S. fast delivery. 5 (*****) for this also.
Very handy, easy to use. Now used it for ~ 2 Weeks. Found it Excellent.
Size and ease of use.
Bought MNP 300 hand pump from zirakpur.
The meter is useless. Gives fluctuating reading.
Not at all accurate. Will have to exchange it for a better product. Till now money wasted. Inflates the tire but whats the use without reading???
Thank you for taking the time to give us your review. The product you have reviewed is the Hand pump 300 but the review was written on the handpump 500 page. Keeping that aside the meter on the handpump 300 shows readings in BARs and PSI. These are the directions to use it. We press the button below the meter and select which metric you would like the readings to be displayed in. Once this is done you start pumping . The psi will fluctuate everytime you pump however, once the pumping is completed you will see a constant reading. This reading also depends on how well you have sealed the valve of the inner tube while pumping. If you find the pump to be functioning inefficiently you can exchange it with the store. The store can help you test the new pump as well.
Deepak Babu E-sport manager DECATHLON
Deepak Babu E-sport manager DECATHLON
I had this pump for a couple of months; I lost it because it fell out of the holder. It worked well wile it lasted so I was disappointed to loose it. It is worth keeping this in mind when purchasing this as it fell out quite often- not just a one off.
Perfect small pump for everyday use.