Resist 9 Slick 26x1.2 Flex Bead + Protection MTB Tyre / ETRTO 30-559



MRP : ₹ 999

Made In : Sri Lanka

Made for occasionally using your mountain bike in town.
Excellent performance on roads with a MTB.
Sizes guide

Warning: Last items in stock!

Home     Delivery


view all stores

CompatibilityFor 26" inner tubes and wheels.
GripExcellent traction thanks to the smooth, slightly textured tread.
Puncture resistancePuncture Protect: high-hardness rubber layer under the tread.
EfficiencyExcellent performance on roads with a mountain bike.
Weight320 g. Flex bead.
WaterproofUse with inner tubes only
Warranty2 Years
Technical Information

How to measure tyre wear
To measure the wear on your tyres and to know when they need replacing, you need to inspect the tread. The tread comes into direct contact with the terrain you are cycling on and therefore determines your tyre's performance. A tyre needs to be changed when the centre knobs are worn down to the same height as the side knobs.
How to remove a tyre
To remove your tyre, first deflate the inner tube until no more air comes out. Once deflated, use a tyre lever to remove the tyre from the rim.
How to put your tyre back on
To put the tyre back on, place one side of the tyre into the bottom of the rim. Next, inflate your inner tube to approximately 30% before putting it into the tyre (inflating it beforehand reduces the risk of pinching the inner tube). Then, place the other side of the tyre into the rim, starting on the side opposite the valve. Before inflating the inner tube all the way, check to make sure it isn't pinched between the tyre and the rim.
How to inflate your tyre correctly
Inflate your tyre carefully. The recommended pressure is indicated on the side of your tyre as well as on its product sheet (available online). Before each outing, make sure that your tyres are at the correct pressure for your ride.
Tip from the pros
When inflating your tyre, be sure to inflate it to the correct pressure for the terrain you will be riding on and especially the weather conditions. When riding in rainy weather, lower the tyre pressure to increase the tyre's traction. On the other hand, when riding in dry weather, you can increase the pressure for better performance.
UseRolling roads and trails

Tyre size26x1.20




Weight500 g
Information / Concept / Technology
Membrane : 50.0% Rubber - Synthetic, Membrane : 50.0% Rubber - Natural Rubber (NR) - Latex

The Wheel Energy laboratory, certified and recognised by the leading global brands, measures several different criteria: grip, cushioning, resistance to wear, longevity, performance, etc.

Product test
At B'Twin we design the tyres of tomorrow. designed by our engineers at our research & development lab at our international headquarters in Lille, France. The tyre is then tested in our laboratories as well as in real world use by our professional cycling team to ensure outstanding quality. This expertise is highlighted on our range of B'Twin tyres with the label "Designed in France".

Stockage tips
This is a flex bead tyre that is easy to fold for easy transport and storage.


Sort by:
Be very careful in rain / on wet roads
Used for 3 to 6 months
Put these tyres on an old mountain bike. Very happy with the performance until I used them on wet roads for the first time. Went round a corner, probably at 10-15mph, bike slipped sideways and I came off. I've ridden bikes for 40 years, so I'd say I'm quite experienced. I didn't hit a painted line and there was no oil on the street. Bike and knees damaged. I won't use them on wet roads again and I recommend that anyone using them to commute in traffic be very careful if it rains. I'll add that I'm a fan of Decathlon products generally.
Hey. Mybike is now lot of fun
Used for 2 to 8 weeks
Mybike became so nimble. Superb tires.
First impressions good
Used for 1 week or less
Only 415g (26x1.2) easy to fit, roll fast. Centre portion seems quite thick so hopefully puncture resistance will be ok. (none in the first 100km)
  • 1
Show results for