QUECHUAⓘ ID: 8545324
Men's Hiking Lightweight Waterproof Overtrousers MH500
★ 0.0/0 (000)
₹ 3,999
₹2,999
SELECT SIZE
DELIVERY & SERVICES
SELLER PROMISE
Sold and Fulfilled by : Decathlon Sports India Pvt Ltd
Made for
At the foot of Mont Blanc, our team of enthusiasts has designed these waterproof trousers for hiking in the mountains and protecting you from storms.
Advantages
waterproof
Storm protection 2.5 layer membrane, 15,000 mm H²O mm (Schmerbers)
breathability
Perspiration-wicking component (RET = 8)
lightweight
Only 354g in size L
ease of use
Zip rising above knee: Put it on, take it off without removing your shoes
pockets
Storage pocket so that your belongings inside your rucksack do not get wet.
anatomic design
Elasticated waistband to find the best adjustment
compact design
Lightweight & compact,it folds into its pocket to take minimum volume in the bag
| Quantity | 1 U |
| Size | UK27" FR36 (L33), UK43" FR52 (L32), UK46" FR54 (L32), UK48" FR56 (L32), UK48" FR56 (L34), UK51" FR58 (L32), UK51" FR58 (L34), S- Waist -29", S/M - Waist -31", UK27" FR36 (L30), UK29" FR38 (L33), UK31" FR40 (L33), UK32" FR42 (L33), UK34" FR44 (L34), UK36" FR46 (L34), M- Waist -32", L - Waist -34", XL - Waist -36", UK39" FR48 (L32), XL/2XL - Waist -39", UK41" FR50 (L32), 2XL - Waist -41", 3XL - Waist -43", 4XL - Waist -44" |
| Cut | Standard cut. Can be worn over trousers, leggings or shorts. Caution: no hems possible due to the zips on the side of the legs |
| Main component | 3-layer component with membrane |
| MEMBRANE | The waterproof rating of a product depends on the following two main criteria: its component and its construction. This product was made with a membrane. This is a kind of very thin plastic film (polyurethane) that makes the component waterproof while remaining breathable. It has the advantage of being flexible, lightweight and breathable. |
| LAYER DESIGN | 3 layer design: The membrane is glued between the outer and inner fabric. We use it for durable and high performance over-trousers |
| WATERPROOF FEATURE OF THE COMPONENT | Laboratory tests are conducted to guarantee the waterproof rating of a component. This is done by measuring the fabric's resistance to water pressure expressed in terms of the height of a water column in mm (based on the ISO 811 standard). The higher the water pressure, the more waterproof the fabric. This product's component has a 15,000 mm waterproof rating and can withstand the pressure of a 15,000 mm water column. This is also equivalent to 15000 Schmerbers. |
| WATERPROOFING OF THE OVER-TROUSERS | We conduct laboratory tests that simulate rainfall scenarios in order to guarantee the jacket's waterproof rating. This garment has been validated in a shower test under 18 cm rain for 2 hours. This test reproduces the average conditions of a mountain storm. |
| HOW TO RESTORE THE WATER-REPELLENT PROPERTIES | A fabric is water repellent when it allows water slide over its surface without seeping in. The fabric does not soak up water and therefore remains lightweight and breathable. The water repellent property is achieved by treating the fabric's exterior. This treatment needs to be renewed during the lifetime of the garment. Water-repellent properties can be reactivated by tumble drying the trousers for 10 minutes on low temperature or by using a reactivating spray.( Ref: 8551983) |
| COMPONENT BREATHABILITY | Component breathability is measured by its thermal evaporative resistance (RET). This is its capacity to let water vapour generated by the body during physical activity escape and therefore avoid water accumulating on the skin. The lower the RET, the more breathable the fabric. RET ≤ 6: very breathable fabric RET ≤ 12: breathable fabric RET ≤ 20: not very breathable fabric This product was assessed at 8 RET |
| OUR ENVIRONMENTAL POLICY | Because we are aware that we must act to preserve our playground, Quechua is committed to limiting the environmental impact of its products. Today, this product is not eco-designed, but we work every day to make it more responsible: eco-design, repairability and sustainability are at the heart of our developments. |
| WHERE DO OUR TROUSERS COME FROM? | Created in our international design centre at the foot of Mont Blanc in France, these over trousers are then manufactured by our suppliers in Bangladesh. We collaborate closely with these partners who have real expertise in the manufacture of over trousers. Thanks to this relationship of trust with our industrial partners, we can create high-quality technical products. |
| Working conditions in our production workshops | We guarantee that our suppliers comply with our code of conduct. These suppliers are often located in developing countries where our presence helps to create jobs. By conducting audits and having teams on site, we make sure that the working environment of the employees meets certain quality standards in terms of human respect, personal fulfilment and environmental protection. |
| Product design: our expertise | Our Quechua global design centre is based in Passy, at the foot of Mont-Blanc in Haute Savoie. This location makes it a real meeting place for our teams (designers, product managers, engineers, etc) and outdoor sports enthusiasts. A great asset for designing your mountain walking products and providing you with all our expertise. |
| MRP | ₹ 3,999 inclusive of all taxes |
CYCLING
PRODUCTS