Made for We have designed this antishock pole for hiking and trekking enthusiasts who practice intensively on rough mountain terrain Pole with cushioning to reduce the impact on joints. The shock absorber can deactivate whenever you want
This model is designed and validated by our team, at the foot of the Mont Blanc.
To fulfil the anti-shock promise, we have chosen this system with a spring integrated in the screw tightening system.
We then designed a handle that enables powerful and comfortable grip no matter what the position: along the tube for climbs and banking terrain, with the wrist strap for efficient pushing and on the knob for descents.
How to adjust your poles to the correct length?
Hold the poles with your arms bent at a right angle.
To adjust the length: unscrew the middle part, mark the size of the pole you need and screw back tightly. Tighten more if you notice that the pole shortens as you use it. repeat with the lower section. Never go over the STOP line to avoid breaking the pole.
Directions for use
These hiking poles are designed to help you balance, propel yourself and spread the effort between the arms and legs.
To increase safety, before you start and at regular intervals, check your pole's locking mechanism by pressing down hard on it.
Do not put them on backpacks in stormy weather.
Maintaining your poles properly enable you to maintain optimal function and increases their lifespan.
After use, if water has got into the pole, take the parts apart and allow to dry. Clean any dust and mud with water or without, with a soft brush or paintbrush.
Once dry, you can reassemble the parts. We recommend that you do not try to oil or grease them.
Store the poles without tightening the adjustment system, to avoid stress and retain their hold power. Store poles in a dry place.
To set our thresholds, we have measured the stresses on the poles in the most demanding situations. During the design stage, each model passes laboratory tests that reproduce these stresses; etc.) until rupture. We also tests parts separately (tightening power, tearing, etc). Finally, these tests are regularly repeated during production to guarantee constant quality.