View All
FORCLAZⓘ ID: 8559651
Women Trekking Waterproof Boots MATRYX® - VIBRAM® - ALLTRAIL MT700
★ 0.0/0 (000)
₹ 24,999
₹14,999
SELECT SIZE
DELIVERY & SERVICES
SELLER PROMISE
Sold and Fulfilled by : Decathlon Sports India Pvt Ltd
Made for
These waterproof boots provide comfort and foot support on relatively difficult trails with a moderate to steep slope.
Advantages
grip
Vibram® rubber sole with excellent grip on dry and muddy terrain
waterproof
Waterproof membrane tested on a 20 km walk in water up to the mid-upper
durability
High performance Matryx® textile and 100% rubber toe bumper
foot motion
Semi-rigid sole for a good compromise between foot movement/precision of hold
foot support
High upper with 2 high hooks +1 secure blocker hook + X ankle system
cushioning
Durable and high-performance PU cushioned midsole
weight
Only 540 g per boot in size 39 (UK size 6)
| Quantity | 1 U |
| Size | 3, 4, 5, 5.5, 6.5, 7, 8 |
| Technical characteristics | Lacing system Open hook + webbing Blocking hook Rubber stone guard at the front of the boot "Bootie" waterproof, breathable membrane EVA midsole + soft PAD Heel insert in PU Outsole: ForclazDesign Vibram® sole with thick and deep spikes. Lining composition: textile Upper composition: high resistance Matryx®EVO textile Weight: 540 g Medium fit footwear Made in Europe |
| European made 100% of our Forclaz boots are manufactured in Europe | These boots are manufactured in the European Union, in Romania, in a factory that specialises in making hiking boots (SKANDIA). Main upper component: French made For greater transparency, here is the link to our French partner: https://chamatex.net/marques/matryx/ Tip: copy/paste the links on this page into your preferred search engine) |
| Benefit of the self-locking hook | With this material, you can separate the upper and lower lacing This allows you to adjust the lacing to the shape of your foot and give your ankle as much freedom as you like. To separate the upper lacing from the lower part, make a simple knot level with your instep or use your shoes’ self-locking hook. All of our trekking shoes have this feature. |
| Dope Dye process used on the lining of this model | Dyeing textiles uses lots of water, chemical products and energy. However, we enjoy wearing colour. To reduce this impact, we use the “Dope Dyed” technique where powder colour pigments are added when the yarn is produced (and not by soaking it in dye baths as is usually the case). This reduces consumption and the discharge of waste water from colouring our fabrics. |
| Why we use recycled plastic | Plastic is a non-biodegradable synthetic material made from oil. It builds up in the environment after use, fragments into micro-particles and pollutes all areas. It is found absolutely everywhere! . By using plastic waste, the oil resources needed for its production and the amount of waste are both reduced. This is already a step towards sustainable production. |
| We use recycled plastic | Our mounting sole is made from 80% recycled plastic Ankle skeleton support is made from 100% recycled plastic. |
| VIBRAM®. Grip and traction of our soles | Our VIBRAM® branded soles provide excellent grip on all dry, earth or rocky terrain. Just awesome! The VIBRAM® notching also gives you grip adapted to muddy or wet terrain. Medium width sole: the wider the sole, the softer it is. Therefore, with this sole it’s comfortable to walk on most trails without losing stability. |
| MATRYX®, a highly resistant innovative textile, the result of French expertise | The durability over time of the MATRYX® technology is undeniable. The French design and the recycled polyester yarn used in the composition of certain textiles add to our contribution to developing sustainable products. To find out more : https://www.matryx-textile.com/ Tip: copy and paste in your favourite browser from the link above ;) |
| MATRYX® EVO technology | The part of the upper, which is used the most in the field, is made of a MATRYX EVO fabric. It is a jacquard with a built-in lining. Technical compound of a PA warp coated with 550DTEX PU and a PA weft coated with 550DTEX PU. 167Dtex PES lining Aramid yarn throughout the upper to ensure good support |
| Increase your boot’s waterproofing with a gaiter | The waterproofing of boots is often compromised because water gets in at the collar of the boot. --> To keep your feet dry for longer, it is advisable to use a waterproof gaiter or mini-gaiter that will prevent water as well as pebbles and sand from getting inside through the top of the boot. Model perfectly suited to this trekking gaiter MT500 black https://www.decathlon.co.uk/p/trek-500-trekking-gaiters-black/_/R-p-124466?mc=8347880&c=BLACK |
| Make the waterproofing of this textile model last longer | Even though this model has a WATERPROOF MEMBRANE (waterproof, breathable), it is recommended you use a re-waterproofing spray a few times a year to restore the original water-repellent properties and prevent staining of the outer material. --> It revitalises the water-repellent properties of the outer material (water runs off and doesn't soak in). Each fabric section is sprayed taking care not to forget the thread in the seams (water loves seams!!) |
| Water-repellent reactivator application | 1/ Use a brush and/or sponge to clean and remove any dirt or mud. 2/ Then leave to air dry, away from any heat source. 3/ Shake the WATERPROOF SPRAY can €5 4/ Spray the product from a distance of 25 cm 5/ Leave for at least 10 minutes. Caution: Do not rub or wipe. Link to SPRAY below: https://www.decathlon.co.uk/p/100-ml-waterproof-stain-resistant-spray-for-leather-and-textile-walking-shoes/_/R-p-312940 |
| No eco-design without great durability in our products! | As well as the various laboratory tests, these boots were tested in the field by passionate trekkers during a 500 km durability test on the GR5 and trekking trails of the Canaries. Check out the film of this mission test by clicking this link: https://www.youtube.com/watch?v=L5o2h5v5RsU |
| Lab tests | Laboratory tests were conducted to test the following elements: - tearing of the eyelets and straps - bonding of the sole - toxicology - UV-resistance - abrasion of the sole and components of the upper - accelerated ageing |
| Use with strap-on crampons only | This model of trekking boot allows for the occasional use of strap-on crampons only. It is sufficiently rigid for the occasional use of strap-on crampons while guaranteeing extremely good comfort when walking. https://www.decathlon.fr/p/crampons-d-alpinisme-caiman-2-lanieres/_/R-p-9186?mc=8212786&gclid=Cj0KCQiAtrnuBRDXARIsABiN-7ADHOa1Ivqjeba-6L4HjHF88mWLsL5rlmpz0zrXB9YfKALqI0lTYuIaArxaEALw_wcB |
| Choosing your size is an important point. | For hiking, do not hesitate to buy one size larger than the usual size to guarantee excellent comfort on the descent and to avoid toes rubbing at the tip of the shoe. Tip: keep your toenails short and, before descending, check that your lacing prevents your foot from sliding forwards inside the boot. |
| Waterproofing test carried out on this model | This boot has been tested and validated for 50,000 flexes repeatable, equivalent to a 20 km walk, in water reaching the mid-upper. This now guarantees a good level of boot waterproofing. --> Our assessment indicates a LEVEL OF 4/5 giving 8 hours of waterproofing when hiking in the rain. The details of tests carried out to assess the waterproofing of our boots is below. |
| 5 levels of waterproofing | During the waterproofness test, we test 5 levels of waterproofness: - 2,000 flexes (approximately 4 km, 30 minutes of walking) - 10,000 flexes (approximately 10 km, 3 hours of walking) - 30,000 flexes (approximately 15 km, 6 hours of walking) - 50,000 flexes (approximately 20 km, 8 hours of walking) - 100,000 flexes (approximately >20 km, 24 hours of walking) |
| 100% waterproofing laboratory tested | Our boots are laboratory tested by 2 consecutive tests. Test 1: We test the effectiveness of the membrane alone immersed in water under air pressure. We simply check for any bubbles on the surface like a pierced air chamber. Test 2: Thanks to a mechanical arm that simulates walking, the entire boots are half immersed in water and they complete thousands of flexes to check that the inside of the boot remains dry and it is therefore waterproof. |
| Try your boots out step by step | How to choose your boots: 1. Try on both shoes, standing up, with the socks worn for hiking. 2. Tighten the laces correctly. 3. Check the following two areas of comfort: the base of the heel and the front part of the foot going down. 4. Stand up to walk with the boots on. 5. Try on several sizes and several models. 6. Gradually start using you shoes during your first few hiking trips to break them in. |
| MRP | ₹ 24,999 inclusive of all taxes |
CYCLING
PRODUCTS